Deck Jack Leg

DeckJackLeg_logo

A 240mm length of post treated H3.2 LVL timber, pre-cut on a 2 degree angle and fitted with a DECK CHAIR® rubber mount adhered to the base.

TO INSTALL

1

POSITION
Once the joist frame is complete (including boundary joists), simply lift the frame to level, and temporary block the frame in position.

2

FIX
Fix the Deck Jack Leg upright to the side of the joist frame. The end of the Leg is pre-cut on a 2 degree angle and pre-fitted with a Deck Chair rubber mount, so simply turn the leg to ensure the mount is flat on the surface.

3

COMPLETE
Fix a Leg every 450mm max to alternate sides of the joist. Ensure a Leg is providing support on the complete perimeter of frame.

4

TRIM
When frame is completely mounted on the Legs and temporary blocks have been removed, trim off any excess length from the Leg.

DECK CHAIR® Deck Jack Leg & rubber mount

SET OUT

1.5 DEGREE DECK SLOPE OVER 4.8m

CrossSectionJoist

Completed frame using DECK JACK® Deck Jack Legs

DOWNLOAD

The installation guide as PDF

ORDER

Place an order for Adjustable Joists